Preview of the new creaid.ai. Not live yet. Yellow = to confirm with you.

Underwriting and numbers · 7 min read

Interest-Only Periods and Amortization in Commercial Loans

Short answer

Amortization is the schedule over which a loan's principal is repaid, and an interest-only (IO) period is a stretch of time when you pay interest and no principal. A longer amortization or an IO period lowers your payment and raises cash flow and DSCR, but leaves a larger balance to refinance when the loan matures. Most commercial loans mature long before they are fully amortized, so the choice shapes both your monthly cash and your exit.

A commercial bank building
A commercial bank building. Example photo: Joe Mabel, CC BY-SA 3.0, via Wikimedia Commons.

Term and amortization are two different clocks

A home mortgage usually has one number: 30 years. A commercial loan has two. The term is when the loan comes due, often 5, 7 or 10 years. The amortization is the schedule used to calculate the payment, often 25 or 30 years. A loan quoted as 10/30 has a 10-year term with payments calculated as if it would be repaid over 30 years.

Because the term ends first, a balance is still owed at maturity. That is the balloon payment, and it is almost always repaid by refinancing or selling. Only a few loan types are fully amortizing, meaning the term and the amortization are the same. SBA loans and HUD multifamily loans are the main examples; a HUD 223(f) loan typically runs up to 35 years with no balloon. See HUD multifamily loans explained.

How the structure changes your payment

Take a $5,000,000 loan at a hypothetical 6% fixed rate on a property with $450,000 of NOI. Here is the same loan under four payment structures.

StructureAnnual paymentDSCRBalance after 10 years
Interest-only$300,0001.50x$5,000,000
30-year amortization$359,7301.25xAbout $4,184,000
25-year amortization$386,5811.16xAbout $3,818,000
20-year amortization$429,8591.05xAbout $3,227,000

The interest-only payment is simply $5,000,000 x 6% = $300,000. Each amortizing payment adds principal on top. Going from interest-only to a 30-year schedule costs $59,730 more a year, and going from 30 to 25 years costs another $26,851.

Look at the DSCR column. The same property and the same loan amount pass a 1.25x test on a 30-year schedule and fail it on a 25-year schedule. Amortization is one of the strongest levers on loan size, which is why it belongs in any discussion of DSCR.

What interest-only gives you and what it costs

In the example, the interest-only structure leaves $150,000 of cash flow after debt service ($450,000 - $300,000). The 30-year schedule leaves $90,270. On the same equity, that is a much higher cash return in the early years, which is why investors ask for IO.

The cost shows in the last column of the table. After 10 years of interest-only, you still owe all $5,000,000. On the 30-year schedule you would owe about $4,184,000, so roughly $816,000 of principal has been repaid from the property's income. That repaid principal is equity you get back at sale, and it is protection if values fall before you refinance.

  • Full-term IO: no principal is paid for the whole term. Highest cash flow, largest balloon.
  • Partial IO: interest-only for the first one to five years, then amortizing. In the example, three years of IO followed by a 30-year schedule leaves a balance of about $4,482,000 after 10 years.
  • No IO: amortization starts with the first payment. Lowest balloon, lowest early cash flow.

Remember that the payment jumps when a partial IO period ends. In the example it rises from $300,000 to $359,730 a year. Make sure the property's income at that point will cover it. A simple check is to calculate DSCR on the amortizing payment using the income you have now, not the income you hope to have. If the ratio is below 1.00x, the plan depends entirely on rent growth arriving on schedule.

How lenders decide what to offer

Interest-only and long amortization are forms of risk for the lender, so they are granted to stronger deals. Typical patterns by lender type:

  • Banks and credit unions commonly amortize over 20 to 25 years, sometimes 30 for multifamily, with little or no IO on permanent loans.
  • Agency lenders, CMBS and life companies commonly use 30-year amortization and offer partial or full-term IO, with more IO available at lower loan-to-value.
  • Bridge and construction lenders usually make interest-only loans, because the property is not yet producing stable income. See commercial bridge loans explained.
  • SBA and HUD loans are fully amortizing over long terms.

Older buildings and riskier property types often get shorter amortization, because the lender wants the balance to fall faster than the building wears out.

One point catches borrowers out. Even when a lender grants IO, it often sizes the loan on the amortizing payment. If the lender in the example required 1.25x on a 25-year schedule, the maximum debt service would be $450,000 / 1.25 = $360,000, and the loan would shrink to about $4,656,000, whatever the IO period. The guide on how to size a commercial loan covers that step.

Choosing a structure for your plan

  1. Short hold with a value-add plan: IO fits well. You need cash for the work, and you will repay from a sale or refinance at a higher value.
  2. Long hold of a stable property: amortization builds equity and lowers refinance risk. Partial IO can help the first years without leaving the full balloon.
  3. Thin coverage: if the deal needs IO to reach the minimum DSCR, treat that as a warning. Ask what happens if you must refinance into an amortizing loan at a higher rate.
  4. Floating rate: IO payments on a floating-rate loan move with the index, so there is no principal cushion and no fixed payment. See fixed vs. floating rate commercial loans.

Also check how the structure interacts with early payoff. A long IO period on a fixed-rate loan usually comes with yield maintenance or defeasance, described in commercial loan prepayment penalties.

Where CREaiD helps

CREaiD is an AI assistant for commercial real estate financing. You can upload deal data for a quick investment analysis, and the Lender Matchmaker lets you describe your deal and get lenders that fit from a database of 1,500+ lenders, which helps when the amortization or IO you need points to a particular lender type.

Payment structures are set in the loan documents, so confirm the terms with the lender and your own counsel.

Brian Gramlich
About the author

Brian Gramlich is the CEO and founder of Terrydale Capital, a commercial real estate finance firm based in Dallas, Texas, and the founder of CREaiD.

Key takeaways

  • Term is when the loan is due, and amortization is the schedule used to calculate the payment.
  • Longer amortization or interest-only lowers the payment and raises DSCR and cash flow.
  • Interest-only leaves the full balance to refinance at maturity.
  • Lenders often size the loan on the amortizing payment even when they grant an IO period.

Questions people ask

What does 10/30 mean on a commercial loan?

It means a 10-year term with payments calculated on a 30-year amortization schedule. At the end of year 10 the remaining balance is due as a balloon payment. Most borrowers refinance or sell before that date.

Is interest-only a bad idea?

Not by itself. It suits short holds and business plans that need cash early. The risk is at maturity: you owe the full balance, so a drop in value or a rise in rates has more effect on your refinance.

Can I pay extra principal during an interest-only period?

Only if the loan documents allow it. Many fixed-rate loans restrict partial prepayments or charge a penalty on them. Ask before closing if you expect to pay the balance down.

Why do banks use shorter amortization than agency lenders?

Banks hold loans on their own balance sheets and are examined by regulators, so they prefer balances that decline faster. Agency loans are funded through the bond market against apartment properties, which lenders view as stable enough for 30-year schedules.

Does amortization affect my interest rate?

Sometimes. A loan with full-term interest-only may be priced slightly higher than the same loan with amortization, because the lender carries more risk at maturity. The larger effect is on loan size, through the DSCR test.

Find lenders for your deal in minutes

CREaiD shows the lenders that really made your kind of loan in your state, from public loan records.

Start free