
The rule: the smallest number wins
A term sheet may say up to 75% of value, but that is only one limit. Every lender sets several, and the loan must pass all of them at once. Sizing a loan means solving each limit for a loan amount and choosing the lowest.
| Test | Formula for maximum loan | What it protects |
|---|---|---|
| LTV | Value x maximum LTV | Collateral value |
| DSCR | (NOI / minimum DSCR) / loan constant | Ability to make payments |
| Debt yield | NOI / minimum debt yield | Income per dollar lent |
| LTC (transitional deals) | Total cost x maximum LTC | Sponsor equity in the project |
Each test has its own guide if you want the detail: DSCR, debt yield and LTV vs. LTC. This guide is about putting them together in the right order.
Step 1: get the inputs the lender will use
You need four inputs, and all four should be the lender's version, not yours.
- Underwritten NOI. Your income after the lender's vacancy, management fee and reserve adjustments. See how lenders calculate NOI.
- Value. The lower of the purchase price and the appraised value on an acquisition, or the appraised value on a refinance.
- The loan constant. Annual debt service divided by the loan amount. It depends on the interest rate and the amortization period, and it is what converts a payment into a loan amount.
- The lender's minimums. Maximum LTV, minimum DSCR and minimum debt yield for your property type.
The loan constant deserves a moment. For an interest-only loan it equals the interest rate. For an amortizing loan it is higher, because each payment includes principal. At a hypothetical 7% rate with 30-year amortization, annual payments are about 8.0% of the loan amount. Any loan calculator will give you the constant: enter a $1,000,000 loan, multiply the monthly payment by 12 and divide by $1,000,000.
Step 2: run the three tests
Say you are buying a stabilized apartment property for $12,000,000, and the appraisal supports that value. Underwritten NOI is $800,000. The lender's limits are 70% LTV, 1.25x DSCR and a 9% debt yield, and the loan constant is 8.0%.
- LTV test: $12,000,000 x 70% = $8,400,000.
- DSCR test: maximum debt service is $800,000 / 1.25 = $640,000. Maximum loan is $640,000 / 0.08 = $8,000,000.
- Debt yield test: $800,000 / 0.09 = $8,888,889.
- Result: the smallest number is $8,000,000. DSCR is the binding constraint.
Check the answer against all three limits. An $8,000,000 loan is 66.7% of value ($8,000,000 / $12,000,000), has a 10% debt yield ($800,000 / $8,000,000) and carries $640,000 of debt service for exactly 1.25x coverage. It passes every test, and it is $400,000 less than the headline 70% LTV suggested. You need $4,000,000 of equity plus closing costs, not $3,600,000.
Step 3: see what moves the binding constraint
The test that binds is not fixed. It shifts with interest rates and with the loan structure, and knowing which one is binding tells you what to negotiate.
- Lower constant. If the rate were lower, or the lender sized on an interest-only payment, the constant might be 7.0%. The DSCR test rises to $640,000 / 0.07 = $9,142,857, and LTV becomes the limit at $8,400,000. At that loan, debt service is $588,000, coverage is 1.36x and debt yield is 9.5%.
- Higher constant. With a higher rate or a shorter amortization the constant might be 9.0%. The DSCR test falls to $640,000 / 0.09 = $7,111,111.
- More NOI. With a 1.25x minimum and an 8.0% constant, every extra $10,000 of underwritten NOI supports $100,000 more loan ($10,000 / 1.25 / 0.08).
- Higher value. A better appraisal helps only when LTV is the binding test. In the base example it would change nothing.
The practical lesson: when DSCR binds, work on the payment (rate, amortization, interest-only) and on NOI. When LTV binds, work on value and the appraisal. When debt yield binds, only more income or a different lender helps. The guide to interest-only periods and amortization shows how much the payment structure can move the DSCR test.
Sizing a bridge or construction loan
On a transitional deal, the property does not yet have the income to pass a DSCR test, so the lender sizes on cost first and then checks the exit.
Say total project cost is $10,000,000 and the lender offers 75% LTC, or $7,500,000. It then asks whether a permanent loan could pay that off once the property is stabilized. If projected stabilized NOI is $780,000 and the lender wants a 10% debt yield at exit, the exit test allows $780,000 / 0.10 = $7,800,000. The smaller number is $7,500,000, so cost is the limit. If projected NOI were only $700,000, the exit test would allow $7,000,000 and the loan would be cut by $500,000.
Lenders also apply a value test on the finished property, using their own exit cap rate, so a business plan has to work on the lender's assumptions and not only on yours.
From loan amount to cash needed
The sized loan is one line in a sources and uses table. List every use of money (price, closing costs, reserves, any renovation budget) and every source (the loan, your equity, any other capital). The two sides must match.
If the sized loan leaves a hole you cannot fill with equity, you have a few options:
- Negotiate the price down to what the debt supports
- Add a second layer of capital, such as mezzanine debt or preferred equity
- Approach a lender type with different limits
- Bring in a partner for more equity
Run this exercise before you sign a purchase contract. A deal that only works at 75% LTV is a different deal when the income supports 65%.
Where CREaiD helps
CREaiD is an AI assistant for commercial real estate financing. You can upload deal data for a quick investment analysis, and its Lender Matchmaker lets you describe the deal and get lenders that fit from a database of 1,500+ commercial real estate lenders. Since limits differ by lender type, a wider list of candidates often changes the sized loan.
Sizing rules and assumptions vary by lender, so confirm the terms with the lender and your own counsel before you commit to a price.
Key takeaways
- Loan size is the smallest result of the LTV, DSCR and debt yield tests.
- All inputs should be the lender's: underwritten NOI, lender value and the lender's loan constant.
- The binding test tells you what to work on: payment and NOI, value, or income alone.
- Bridge and construction loans are sized on cost first, then checked against the exit.
Questions people ask
What is a loan constant?
A loan constant is one year of loan payments divided by the loan amount. For an interest-only loan it equals the interest rate, and for an amortizing loan it is higher because payments include principal. Dividing the allowed debt service by the constant gives the maximum loan.
Which test usually limits the loan?
It depends on how interest rates compare with cap rates. When borrowing costs are high relative to property yields, DSCR tends to bind. When borrowing is cheap, LTV or debt yield usually sets the limit.
Can I size a loan before I have an appraisal?
Yes, and you should. Use the purchase price or your own value estimate with a conservative cap rate, then run the income tests with an adjusted NOI. The appraisal later confirms or changes only the LTV test.
Do lenders size on the interest-only payment or the amortizing payment?
Many size on the amortizing payment even when the loan has an interest-only period, because the property must carry that payment later. Some lenders size on interest-only for low-LTV loans or full-term interest-only structures. Ask, because the difference in proceeds can be large.
What if the sized loan is smaller than my existing loan balance on a refinance?
Then the refinance needs cash from you to close, sometimes called a cash-in refinance. The alternatives are to add subordinate capital, ask the existing lender for an extension, or raise NOI before refinancing.
CREaiD shows the lenders that really made your kind of loan in your state, from public loan records.
